Effect of silane and temperature on the bond strength between glass ceramic and resin cement

Autores

Palavras-chave:

silane, resin cement, ceramic, heating

Resumo

The aim of this study was to evaluate the effect of silane and temperature, as well as a new combined etch-and-prime product, on the bond strength between glass ceramic and resin cement. Thirty-five ceramic discs (12 mm × 2 mm) were randomly assigned to seven groups (n = 5) according to surface treatment: 1 – Sandblasted, 2 – Sandblasted + silane, 3 – Sandblasted + silane + heating (60 °C), 4 – Hydrofluoric acid (HF), 5 – HF + silane, 6 – HF + silane + heating (60 °C), and 7 – Etch & prime. Resin cement was applied in cylindrical molds (0.75 × 0.50 mm) at five locations on each disc and photoactivated.

Biografia do Autor

Lara Pollyanna de Sousa Pires, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduada em Odontologia pela Universidade de Uberaba. Especialista em Ortodontia, Atenção Básica em Saúde da Família, Dentística e Harmonização Orofacial. Mestranda em Clínica Odontológica Integrada pela Universidade de Uberaba. Atualmente, é responsável técnica da Clínica LAVI Odontologia e Saúde e cirurgiã-dentista da rede municipal de saúde de Uberaba. Possui experiência em Ortodontia, Odontologia Estética e Harmonização Orofacial.

Amauri José Lima Mendes, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduado em Odontologia pela Universidade de Uberaba. Especialista em Atenção Básica com ênfase em Saúde da Família pela Universidade Federal de Minas Gerais e mestre em Odontologia pela Universidade de Uberaba. Possui aperfeiçoamento em Prótese sobre Implantes e experiência em gestão da Atenção Básica. Foi responsável técnico do Ambulatório de Odontologia da UFTM e, atualmente, é odontólogo vinculado ao CEFORES/UFTM.

Maria Fernanda Porto Ferreira, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduanda em Odontologia pela Universidade de Uberaba.

Analia Gabriella Borges Ferraz Facury, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduada e mestre em Odontologia pela Universidade de Uberaba e doutora em Materiais Dentários pela Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas. Atualmente, é professora do curso de Odontologia da União das Faculdades dos Grandes Lagos. Atua nas áreas de Materiais Dentários e Dentística, com ênfase em biomateriais, cerâmicas odontológicas, cimentos resinosos, sistemas adesivos, polimerização e resistência de união. É pesquisadora e revisora de periódicos científicos.

Kênia Maria Pereira Soares de Toubes, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Doutora em Clínicas Odontológicas e mestre em Clínicas Odontológicas, com ênfase em Endodontia, pela PUC Minas. Especialista em Endodontia e Periodontia pelo CEO-IPSEMG. É professora da graduação, do Programa de Mestrado e da Especialização em Endodontia da Universidade de Uberaba, além de docente da Especialização em Endodontia da Universidade de Itaúna. Possui experiência em microscopia operatória, Endoguide e laserterapia de baixa potência.

Gilberto Antonio Borges, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduado em Odontologia pela Universidade de Uberaba, especialista em Dentística pela Universidade Federal de Uberlândia, mestre e doutor em Materiais Dentários pela Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas. Realizou estágio pós-doutoral na Indiana University School of Dentistry. Atualmente, é professor da Universidade de Uberaba e odontólogo na Universidade Federal do Triângulo Mineiro. Atua na área de Materiais Dentários, com ênfase em cerâmicas odontológicas, agentes cimentantes e resistência de união.

Referências

ABDULJABBAR, T.; ALQAHTANI, M. A.; AL-JEAIDI, Z.; VOHRA, F. Influence of silane and heated silane on the bond strength of lithium disilicate ceramics: an in vitro study. Pakistan Journal of Medical Sciences, Karachi, vol. 32, no. 3, p. 550–554, 2016. DOI: 10.12669/pjms.323.9851. Available at: https://pjms.org.pk/index.php/pjms/article/view/18624. Accessed on: Aug. 11, 2026.

ALRABEAH, G.; ALHAMID, R. F.; ALAMER, B. A.; ALRAJHI, F. N.; BINRAYES, A.; HABIB, S. R. Impact of various surface treatments on the shear bond strength between lithium disilicate ceramics and resin cement. Frontiers in Materials, Lausanne, vol. 11, art. 1496749, 2024. DOI: 10.3389/fmats.2024.1496749. Available at: https://www.frontiersin.org/journals/materials/articles/10.3389/fmats.2024.1496749/full. Accessed on: Aug. 11, 2026.

ASLAN, Y. U.; ULUDAMAR, A.; ÖZKAN, Y. Clinical performance of pressable glass-ceramic veneers after 5, 10, 15 and 20 years: a retrospective case series study. Journal of Esthetic and Restorative Dentistry, Hoboken, vol. 31, no. 5, p. 415–422, 2019. DOI: 10.1111/jerd.12496. Available at: https://onlinelibrary.wiley.com/doi/10.1111/jerd.12496. Accessed on: Aug. 11, 2026.

BAJRAKTAROVA-VALJAKOVA, E.; KORUNOSKA-STEVKOVSKA, V.; GEORGIEVA, S.; IVANOVSKI, K.; BAJRAKTAROVA-MISEVSKA, C.; MIJOSKA, A.; GROZDANOV, A. Hydrofluoric acid: burns and systemic toxicity, protective measures, immediate and hospital medical treatment. Open Access Macedonian Journal of Medical Sciences, Skopje, vol. 6, no. 11, p. 2257–2269, 2018. DOI: 10.3889/oamjms.2018.429. Available at: https://oamjms.eu/index.php/mjms/article/view/oamjms.2018.429. Accessed on: Aug. 11, 2026.

BORGES, G. A.; SOPHR, A. M.; DE GOES, M. F.; SOBRINHO, L. C.; CHAN, D. C. N. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. The Journal of Prosthetic Dentistry, St. Louis, vol. 89, no. 5, p. 479–488, 2003. DOI: 10.1016/S0022-3913(02)52704-9. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0022391302527049. Accessed on: Aug. 11, 2026.

BRUM, R.; MAZUR, R.; ALMEIDA, J.; BORGES, G.; CALDAS, D. The influence of surface standardization of lithium disilicate glass ceramic on bond strength to a dual resin cement. Operative Dentistry, Seattle, vol. 36, no. 5, p. 478–485, 2011. DOI: 10.2341/11-009-L. Available at: https://operative-dentistry.kglmeridian.com/downloadpdf/view/journals/odnt/36/5/article-p478.pdf. Accessed on: Aug. 11, 2026.

BRUZI, G.; CARVALHO, A. O.; GIANNINI, M.; MAIA, H. P.; MAGNE, P. Post-etching cleaning influences the resin shear bond strength to CAD/CAM lithium-disilicate ceramics. Applied Adhesion Science, London, vol. 5, art. 17, 2017. DOI: 10.1186/s40563-017-0096-6. Available at: https://link.springer.com/article/10.1186/s40563-017-0096-6. Accessed on: Aug. 11, 2026.

CONNER, C. et al. Surface evaluation of a novel acid-etching solution for zirconia and lithium disilicate. Materials, Basel, vol. 18, no. 12, art. 2912, 2025. DOI: 10.3390/ma18122912. Available at: https://www.mdpi.com/1996-1944/18/12/2912. Accessed on: Aug. 11, 2026.

FU, L.; ENGQVIST, H.; XIA, W. Glass-ceramics in dentistry: a review. Materials, Basel, vol. 13, no. 5, art. 1049, 2020. DOI: 10.3390/ma13051049. Available at: https://www.mdpi.com/1996-1944/13/5/1049. Accessed on: Aug. 11, 2026.

ISLAM, M. S.; EL BAHRA, S.; ARYAL, A. C. S.; PADMANABHAN, V.; AL TAWIL, A.; SALEH, I.; RAHMAN, M. M.; GUHA, U. The effect of chemical surface modification on the repair bond strength of resin composite: an in vitro study. Polymers, Basel, vol. 17, no. 4, art. 513, 2025. DOI: 10.3390/polym17040513. Available at: https://www.mdpi.com/2073-4360/17/4/513. Accessed on: Aug. 11, 2026.

IVOCLAR VIVADENT AG. Monobond Etch & Prime. Schaan: Ivoclar Vivadent AG, 2023. Technical brochure. Available at: https://www.ivoclar.com/medias/Monobond-Etch-Prime-PRO-2023-EN-678941-18Dec23.pdf. Accessed on: Aug. 11, 2026.

IVOCLAR VIVADENT AG. Monobond Etch & Prime: instructions for use. Schaan: Ivoclar Vivadent AG, 2025. Instructions for use. Available at: https://www.ivoclar.com/en_li/eifu?brand=Monobond+Etch+%26+Prime. Accessed on: Aug. 11, 2026.

LANKES, V.; COLDEA, A.; MEINEN, J.; SCHWENDICKE, F.; STAWARCZYK, B. Airborne-particle abrasion vs. hydrofluoric acid etching of dental ceramics: impact on the tensile bond strength. Materials, Basel, vol. 17, no. 23, art. 5758, 2024. DOI: 10.3390/ma17235758. Available at: https://www.mdpi.com/1996-1944/17/23/5758. Accessed on: Aug. 11, 2026.

LEVARTOVSKY, S.; BOHBOT, H.; SHEM-TOV, K.; BROSH, T.; PILO, R. Effect of different surface treatments of lithium disilicate on the adhesive properties of resin cements. Materials, Basel, vol. 14, no. 12, art. 3302, 2021. DOI: 10.3390/ma14123302. Available at: https://www.mdpi.com/1996-1944/14/12/3302. Accessed on: Aug. 11, 2026.

LIPPERT, J.; DESAI, B.; FALGIANI, M.; STEAD, T.; GANTI, L. Management of hydrofluoric acid burns in the emergency department. Cureus, [S. l.], vol. 12, no. 3, e7152, 2020. DOI: 10.7759/cureus.7152. Available at: https://www.cureus.com/articles/28526-management-of-hydrofluoric-acid-burns-in-the-emergency-department. Accessed on: Aug. 11, 2026.

LU, Y.; BIERMAN, T. E.; DAL PIVA, A. M. O.; TRIBST, J. P. M.; FEILZER, A. J.; KLEVERLAAN, C. J. Effect of surface treatment and resin cement on the bond strength of an advanced lithium disilicate. European Journal of Dentistry, Stuttgart, vol. 18, no. 3, p. 869–876, 2024. DOI: 10.1055/s-0043-1776358. Available at: https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0043-1776358. Accessed on: Aug. 11, 2026.

MATINLINNA, J. P.; LASSILA, L. V. J.; ÖZCAN, M.; YLI-URPO, A.; VALLITTU, P. K. An introduction to silanes and their clinical applications in dentistry. The International Journal of Prosthodontics, Berlin, vol. 17, no. 2, p. 155–164, 2004. PMID: 15119865. Available at: https://www.quintessence-publishing.com/usa/en/journal/the-international-journal-of-prosthodontics. Accessed on: Aug. 11, 2026.

ÖZCAN, M.; ALLAHBEICKARAGHI, A.; DÜNDAR, M. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clinical Oral Investigations, Berlin, vol. 16, no. 1, p. 15–23, 2012. DOI: 10.1007/s00784-011-0636-6. Available at: https://link.springer.com/article/10.1007/s00784-011-0636-6. Accessed on: Aug. 11, 2026.

SILVA, U. P. C.; MAIA, A. P.; SILVA, I. D.; MIRANDA, M. E.; BRANDT, W. C. Influence of the multiple layers application and the heating of silane on the bond strength between lithium disilicate ceramics and resinous cement. European Journal of Dentistry, Stuttgart, vol. 15, no. 4, p. 720–726, 2021. DOI: 10.1055/s-0041-1729457. Available at: https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0041-1729457. Accessed on: Aug. 11, 2026.

SUNDFELD, D. S. N. et al. The influence of hydrofluoric acid concentration on the bond strength and morphology of the surface and interface of glass ceramics to a resin cement. Operative Dentistry, Seattle, vol. 40, no. 5, p. 470–479, 2015. DOI: 10.2341/14-133-L. Available at: https://operative-dentistry.kglmeridian.com/view/journals/odnt/40/5/article-p470.xml. Accessed on: Aug. 11, 2026.

TEICHMANN, M.; GÖCKLER, F.; WEBER, V.; YILDIRIM, M.; WOLFART, S.; EDELHOFF, D. Ten-year survival and complication rates of lithium-disilicate (Empress 2) tooth-supported crowns, implant-supported crowns, and fixed dental prostheses. Journal of Dentistry, Kidlington, vol. 56, p. 65–77, 2017. DOI: 10.1016/j.jdent.2016.10.017. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0300571216302196. Accessed on: Aug. 11, 2026.

THIRANUKOON, P.; KLAISIRI, A.; SRIAMPORN, T.; SWASDISON, S.; THAMRONGANANSKUL, N. Does silane application affect bond strength between self-adhesive resin cements and feldspathic porcelain? Journal of Composites Science, Basel, vol. 9, no. 2, art. 52, 2025. DOI: 10.3390/jcs9020052. Available at: https://www.mdpi.com/2504-477X/9/2/52. Accessed on: Aug. 11, 2026.

TÜRP, L.; NEHRKE, L.; SCHADTE, P.; SIEBERT, L.; KERN, M. Hydrofluoric acid in dentistry: an investigation of isolation and neutralizing agents and precipitates on IPS e.max CAD. The Journal of Adhesive Dentistry, Berlin, vol. 26, p. 283–292, 2024. DOI: 10.3290/j.jad.b5883893. Available at: https://www.quintessence-publishing.com/deu/en/article/5883893/the-journal-of-adhesive-dentistry/2024/volume-26/hydrofluoric-acid-in-dentistry-an-investigation-of-isolation-and-neutralizing-agents-and-precipitates-on-ips-emax-cad. Accessed on: Aug. 11, 2026.

SWANK, H. M.; MOTYKA, N. C.; BAILEY, C. W.; VANDEWALLE, K. S. Bond strength of resin cement to ceramic with simplified primers and pretreatment solutions. General Dentistry, Chicago, vol. 66, no. 5, p. 33–37, 2018. PMID: 30188854. Available at: https://www.agd.org/about-agd/publications-news/general-dentistry/general-dentistry-details/september-october-2018. Accessed on: Aug. 11, 2026.

WILLE, S.; LEHMANN, F.; KERN, M. Durability of resin bonding to lithium disilicate using different self-etching and conventional ceramic primers after long-term aging. Dental Materials, Kidlington, vol. 38, no. 2, p. 444–450, 2022. DOI: 10.1016/j.dental.2021.12.027. Available at: https://www.sciencedirect.com/science/article/pii/S0109564121003584. Accessed on: Aug. 11, 2026.

YANAKIEV, S. S.; MARINOVA-TAKOROVA, M. B. Silane heat treatment could eliminate the hydrofluoric acid etching of lithium disilicate overlays: a four-year follow-up. Case Reports in Dentistry, [S. l.], vol. 2021, art. 9961621, 7 p., 2021. DOI: 10.1155/2021/9961621. Available at: https://onlinelibrary.wiley.com/doi/10.1155/2021/9961621. Accessed on: Aug. 11, 2026.

ZARONE, F.; DI MAURO, M. I.; AUSIELLO, P.; RUGGIERO, G.; SORRENTINO, R. Current status on lithium disilicate and zirconia: a narrative review. BMC Oral Health, London, vol. 19, no. 1, art. 134, 2019. DOI: 10.1186/s12903-019-0838-x. Available at: https://link.springer.com/article/10.1186/s12903-019-0838-x. Accessed on: Aug. 11, 2026.

ZHANG, Y.; VARDHAMAN, S.; RODRIGUES, C. S.; LAWN, B. R. A critical review of dental lithia-based glass-ceramics. Journal of Dental Research, Thousand Oaks, vol. 102, no. 3, p. 245–253, 2023. DOI: 10.1177/00220345221142755. Available at: https://journals.sagepub.com/doi/10.1177/00220345221142755. Accessed on: Aug. 11, 2026.

Arquivos adicionais

Publicado

2026-09-14

Como Citar

de Sousa Pires, L. P., Mendes, A. J. L., Ferreira, M. F. P., Borges Ferraz Facury, A. G., de Toubes, K. M. P. S., & Borges, G. A. (2026). Effect of silane and temperature on the bond strength between glass ceramic and resin cement. Revista De Ensino, Pesquisa E Extensão Em Saúde, 1(1), 1–12. Recuperado de https://revistas.uniube.br/index.php/epex/article/view/1919

Edição

v. 1 n. 1 (2026): Publicação contínua

Seção

Artigos

Artigos Semelhantes

Você também pode iniciar uma pesquisa avançada por similaridade para este artigo.