Effect of silane and temperature on the bond strength between glass ceramic and resin cement

Autores/as

Palabras clave:

silane, resin cement, ceramic, heating

Resumen

The aim of this study was to evaluate the effect of silane and temperature, as well as a new combined etch-and-prime product, on the bond strength between glass ceramic and resin cement. Thirty-five ceramic discs (12 mm × 2 mm) were randomly assigned to seven groups (n = 5) according to surface treatment: 1 – Sandblasted, 2 – Sandblasted + silane, 3 – Sandblasted + silane + heating (60 °C), 4 – Hydrofluoric acid (HF), 5 – HF + silane, 6 – HF + silane + heating (60 °C), and 7 – Etch & prime. Resin cement was applied in cylindrical molds (0.75 × 0.50 mm) at five locations on each disc and photoactivated.

Biografía del autor/a

Lara Pollyanna de Sousa Pires, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduada en Odontología por la Universidad de Uberaba. Es especialista en Ortodoncia, Atención Primaria en Salud Familiar, Odontología Restauradora y Armonización Orofacial. Actualmente, cursa la maestría en Clínica Odontológica Integrada en la Universidad de Uberaba, es responsable técnica de la Clínica LAVI Odontologia e Saúde y cirujana dentista de la red municipal de salud de Uberaba. Posee experiencia en Ortodoncia, Odontología Estética y Armonización Orofacial.

Amauri José Lima Mendes, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduado en Odontología por la Universidad de Uberaba. Es especialista en Atención Primaria con énfasis en Salud Familiar por la Universidad Federal de Minas Gerais y máster en Odontología por la Universidad de Uberaba. Posee formación avanzada en prótesis sobre implantes y experiencia en gestión de la Atención Primaria. Fue responsable técnico del Ambulatorio de Odontología de la UFTM y actualmente se desempeña como odontólogo en el CEFORES/UFTM.

Maria Fernanda Porto Ferreira, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Estudiante de grado en Odontología en la Universidad de Uberaba.

Analia Gabriella Borges Ferraz Facury, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduada y máster en Odontología por la Universidad de Uberaba y doctora en Materiales Dentales por la Facultad de Odontología de Piracicaba de la Universidad Estatal de Campinas. Actualmente, es profesora del curso de Odontología de la União das Faculdades dos Grandes Lagos. Desarrolla actividades en las áreas de Materiales Dentales y Odontología Restauradora, con énfasis en biomateriales, cerámicas dentales, cementos de resina, sistemas adhesivos, polimerización y resistencia de unión. También se desempeña como investigadora y revisora de revistas científicas.

Kênia Maria Pereira Soares de Toubes, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Doctora en Clínicas Odontológicas y máster en Clínicas Odontológicas, con énfasis en Endodoncia, por la PUC Minas. Es especialista en Endodoncia y Periodoncia por el CEO-IPSEMG. Es profesora de grado, del Programa de Maestría y de la Especialización en Endodoncia de la Universidad de Uberaba, así como de la Especialización en Endodoncia de la Universidad de Itaúna. Posee experiencia en microscopía operatoria, endodoncia guiada y terapia con láser de baja potencia.

Gilberto Antonio Borges, Universidade de Uberaba - UNIUBE, Uberaba-MG, Brasil

Graduado en Odontología por la Universidad de Uberaba, especialista en Odontología Restauradora por la Universidad Federal de Uberlândia, y máster y doctor en Materiales Dentales por la Facultad de Odontología de Piracicaba de la Universidad Estatal de Campinas. Realizó una estancia posdoctoral en la Indiana University School of Dentistry. Actualmente, es profesor de la Universidad de Uberaba y odontólogo de la Universidad Federal del Triángulo Mineiro. Sus investigaciones se centran en cerámicas dentales, agentes de cementación y resistencia de unión.

Citas

ABDULJABBAR, T.; ALQAHTANI, M. A.; AL-JEAIDI, Z.; VOHRA, F. Influence of silane and heated silane on the bond strength of lithium disilicate ceramics: an in vitro study. Pakistan Journal of Medical Sciences, Karachi, vol. 32, no. 3, p. 550–554, 2016. DOI: 10.12669/pjms.323.9851. Available at: https://pjms.org.pk/index.php/pjms/article/view/18624. Accessed on: Aug. 11, 2026.

ALRABEAH, G.; ALHAMID, R. F.; ALAMER, B. A.; ALRAJHI, F. N.; BINRAYES, A.; HABIB, S. R. Impact of various surface treatments on the shear bond strength between lithium disilicate ceramics and resin cement. Frontiers in Materials, Lausanne, vol. 11, art. 1496749, 2024. DOI: 10.3389/fmats.2024.1496749. Available at: https://www.frontiersin.org/journals/materials/articles/10.3389/fmats.2024.1496749/full. Accessed on: Aug. 11, 2026.

ASLAN, Y. U.; ULUDAMAR, A.; ÖZKAN, Y. Clinical performance of pressable glass-ceramic veneers after 5, 10, 15 and 20 years: a retrospective case series study. Journal of Esthetic and Restorative Dentistry, Hoboken, vol. 31, no. 5, p. 415–422, 2019. DOI: 10.1111/jerd.12496. Available at: https://onlinelibrary.wiley.com/doi/10.1111/jerd.12496. Accessed on: Aug. 11, 2026.

BAJRAKTAROVA-VALJAKOVA, E.; KORUNOSKA-STEVKOVSKA, V.; GEORGIEVA, S.; IVANOVSKI, K.; BAJRAKTAROVA-MISEVSKA, C.; MIJOSKA, A.; GROZDANOV, A. Hydrofluoric acid: burns and systemic toxicity, protective measures, immediate and hospital medical treatment. Open Access Macedonian Journal of Medical Sciences, Skopje, vol. 6, no. 11, p. 2257–2269, 2018. DOI: 10.3889/oamjms.2018.429. Available at: https://oamjms.eu/index.php/mjms/article/view/oamjms.2018.429. Accessed on: Aug. 11, 2026.

BORGES, G. A.; SOPHR, A. M.; DE GOES, M. F.; SOBRINHO, L. C.; CHAN, D. C. N. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. The Journal of Prosthetic Dentistry, St. Louis, vol. 89, no. 5, p. 479–488, 2003. DOI: 10.1016/S0022-3913(02)52704-9. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0022391302527049. Accessed on: Aug. 11, 2026.

BRUM, R.; MAZUR, R.; ALMEIDA, J.; BORGES, G.; CALDAS, D. The influence of surface standardization of lithium disilicate glass ceramic on bond strength to a dual resin cement. Operative Dentistry, Seattle, vol. 36, no. 5, p. 478–485, 2011. DOI: 10.2341/11-009-L. Available at: https://operative-dentistry.kglmeridian.com/downloadpdf/view/journals/odnt/36/5/article-p478.pdf. Accessed on: Aug. 11, 2026.

BRUZI, G.; CARVALHO, A. O.; GIANNINI, M.; MAIA, H. P.; MAGNE, P. Post-etching cleaning influences the resin shear bond strength to CAD/CAM lithium-disilicate ceramics. Applied Adhesion Science, London, vol. 5, art. 17, 2017. DOI: 10.1186/s40563-017-0096-6. Available at: https://link.springer.com/article/10.1186/s40563-017-0096-6. Accessed on: Aug. 11, 2026.

CONNER, C. et al. Surface evaluation of a novel acid-etching solution for zirconia and lithium disilicate. Materials, Basel, vol. 18, no. 12, art. 2912, 2025. DOI: 10.3390/ma18122912. Available at: https://www.mdpi.com/1996-1944/18/12/2912. Accessed on: Aug. 11, 2026.

FU, L.; ENGQVIST, H.; XIA, W. Glass-ceramics in dentistry: a review. Materials, Basel, vol. 13, no. 5, art. 1049, 2020. DOI: 10.3390/ma13051049. Available at: https://www.mdpi.com/1996-1944/13/5/1049. Accessed on: Aug. 11, 2026.

ISLAM, M. S.; EL BAHRA, S.; ARYAL, A. C. S.; PADMANABHAN, V.; AL TAWIL, A.; SALEH, I.; RAHMAN, M. M.; GUHA, U. The effect of chemical surface modification on the repair bond strength of resin composite: an in vitro study. Polymers, Basel, vol. 17, no. 4, art. 513, 2025. DOI: 10.3390/polym17040513. Available at: https://www.mdpi.com/2073-4360/17/4/513. Accessed on: Aug. 11, 2026.

IVOCLAR VIVADENT AG. Monobond Etch & Prime. Schaan: Ivoclar Vivadent AG, 2023. Technical brochure. Available at: https://www.ivoclar.com/medias/Monobond-Etch-Prime-PRO-2023-EN-678941-18Dec23.pdf. Accessed on: Aug. 11, 2026.

IVOCLAR VIVADENT AG. Monobond Etch & Prime: instructions for use. Schaan: Ivoclar Vivadent AG, 2025. Instructions for use. Available at: https://www.ivoclar.com/en_li/eifu?brand=Monobond+Etch+%26+Prime. Accessed on: Aug. 11, 2026.

LANKES, V.; COLDEA, A.; MEINEN, J.; SCHWENDICKE, F.; STAWARCZYK, B. Airborne-particle abrasion vs. hydrofluoric acid etching of dental ceramics: impact on the tensile bond strength. Materials, Basel, vol. 17, no. 23, art. 5758, 2024. DOI: 10.3390/ma17235758. Available at: https://www.mdpi.com/1996-1944/17/23/5758. Accessed on: Aug. 11, 2026.

LEVARTOVSKY, S.; BOHBOT, H.; SHEM-TOV, K.; BROSH, T.; PILO, R. Effect of different surface treatments of lithium disilicate on the adhesive properties of resin cements. Materials, Basel, vol. 14, no. 12, art. 3302, 2021. DOI: 10.3390/ma14123302. Available at: https://www.mdpi.com/1996-1944/14/12/3302. Accessed on: Aug. 11, 2026.

LIPPERT, J.; DESAI, B.; FALGIANI, M.; STEAD, T.; GANTI, L. Management of hydrofluoric acid burns in the emergency department. Cureus, [S. l.], vol. 12, no. 3, e7152, 2020. DOI: 10.7759/cureus.7152. Available at: https://www.cureus.com/articles/28526-management-of-hydrofluoric-acid-burns-in-the-emergency-department. Accessed on: Aug. 11, 2026.

LU, Y.; BIERMAN, T. E.; DAL PIVA, A. M. O.; TRIBST, J. P. M.; FEILZER, A. J.; KLEVERLAAN, C. J. Effect of surface treatment and resin cement on the bond strength of an advanced lithium disilicate. European Journal of Dentistry, Stuttgart, vol. 18, no. 3, p. 869–876, 2024. DOI: 10.1055/s-0043-1776358. Available at: https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0043-1776358. Accessed on: Aug. 11, 2026.

MATINLINNA, J. P.; LASSILA, L. V. J.; ÖZCAN, M.; YLI-URPO, A.; VALLITTU, P. K. An introduction to silanes and their clinical applications in dentistry. The International Journal of Prosthodontics, Berlin, vol. 17, no. 2, p. 155–164, 2004. PMID: 15119865. Available at: https://www.quintessence-publishing.com/usa/en/journal/the-international-journal-of-prosthodontics. Accessed on: Aug. 11, 2026.

ÖZCAN, M.; ALLAHBEICKARAGHI, A.; DÜNDAR, M. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clinical Oral Investigations, Berlin, vol. 16, no. 1, p. 15–23, 2012. DOI: 10.1007/s00784-011-0636-6. Available at: https://link.springer.com/article/10.1007/s00784-011-0636-6. Accessed on: Aug. 11, 2026.

SILVA, U. P. C.; MAIA, A. P.; SILVA, I. D.; MIRANDA, M. E.; BRANDT, W. C. Influence of the multiple layers application and the heating of silane on the bond strength between lithium disilicate ceramics and resinous cement. European Journal of Dentistry, Stuttgart, vol. 15, no. 4, p. 720–726, 2021. DOI: 10.1055/s-0041-1729457. Available at: https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0041-1729457. Accessed on: Aug. 11, 2026.

SUNDFELD, D. S. N. et al. The influence of hydrofluoric acid concentration on the bond strength and morphology of the surface and interface of glass ceramics to a resin cement. Operative Dentistry, Seattle, vol. 40, no. 5, p. 470–479, 2015. DOI: 10.2341/14-133-L. Available at: https://operative-dentistry.kglmeridian.com/view/journals/odnt/40/5/article-p470.xml. Accessed on: Aug. 11, 2026.

TEICHMANN, M.; GÖCKLER, F.; WEBER, V.; YILDIRIM, M.; WOLFART, S.; EDELHOFF, D. Ten-year survival and complication rates of lithium-disilicate (Empress 2) tooth-supported crowns, implant-supported crowns, and fixed dental prostheses. Journal of Dentistry, Kidlington, vol. 56, p. 65–77, 2017. DOI: 10.1016/j.jdent.2016.10.017. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0300571216302196. Accessed on: Aug. 11, 2026.

THIRANUKOON, P.; KLAISIRI, A.; SRIAMPORN, T.; SWASDISON, S.; THAMRONGANANSKUL, N. Does silane application affect bond strength between self-adhesive resin cements and feldspathic porcelain? Journal of Composites Science, Basel, vol. 9, no. 2, art. 52, 2025. DOI: 10.3390/jcs9020052. Available at: https://www.mdpi.com/2504-477X/9/2/52. Accessed on: Aug. 11, 2026.

TÜRP, L.; NEHRKE, L.; SCHADTE, P.; SIEBERT, L.; KERN, M. Hydrofluoric acid in dentistry: an investigation of isolation and neutralizing agents and precipitates on IPS e.max CAD. The Journal of Adhesive Dentistry, Berlin, vol. 26, p. 283–292, 2024. DOI: 10.3290/j.jad.b5883893. Available at: https://www.quintessence-publishing.com/deu/en/article/5883893/the-journal-of-adhesive-dentistry/2024/volume-26/hydrofluoric-acid-in-dentistry-an-investigation-of-isolation-and-neutralizing-agents-and-precipitates-on-ips-emax-cad. Accessed on: Aug. 11, 2026.

SWANK, H. M.; MOTYKA, N. C.; BAILEY, C. W.; VANDEWALLE, K. S. Bond strength of resin cement to ceramic with simplified primers and pretreatment solutions. General Dentistry, Chicago, vol. 66, no. 5, p. 33–37, 2018. PMID: 30188854. Available at: https://www.agd.org/about-agd/publications-news/general-dentistry/general-dentistry-details/september-october-2018. Accessed on: Aug. 11, 2026.

WILLE, S.; LEHMANN, F.; KERN, M. Durability of resin bonding to lithium disilicate using different self-etching and conventional ceramic primers after long-term aging. Dental Materials, Kidlington, vol. 38, no. 2, p. 444–450, 2022. DOI: 10.1016/j.dental.2021.12.027. Available at: https://www.sciencedirect.com/science/article/pii/S0109564121003584. Accessed on: Aug. 11, 2026.

YANAKIEV, S. S.; MARINOVA-TAKOROVA, M. B. Silane heat treatment could eliminate the hydrofluoric acid etching of lithium disilicate overlays: a four-year follow-up. Case Reports in Dentistry, [S. l.], vol. 2021, art. 9961621, 7 p., 2021. DOI: 10.1155/2021/9961621. Available at: https://onlinelibrary.wiley.com/doi/10.1155/2021/9961621. Accessed on: Aug. 11, 2026.

ZARONE, F.; DI MAURO, M. I.; AUSIELLO, P.; RUGGIERO, G.; SORRENTINO, R. Current status on lithium disilicate and zirconia: a narrative review. BMC Oral Health, London, vol. 19, no. 1, art. 134, 2019. DOI: 10.1186/s12903-019-0838-x. Available at: https://link.springer.com/article/10.1186/s12903-019-0838-x. Accessed on: Aug. 11, 2026.

ZHANG, Y.; VARDHAMAN, S.; RODRIGUES, C. S.; LAWN, B. R. A critical review of dental lithia-based glass-ceramics. Journal of Dental Research, Thousand Oaks, vol. 102, no. 3, p. 245–253, 2023. DOI: 10.1177/00220345221142755. Available at: https://journals.sagepub.com/doi/10.1177/00220345221142755. Accessed on: Aug. 11, 2026.

Archivos adicionales

Publicado

2026-09-14

Cómo citar

de Sousa Pires, L. P., Mendes, A. J. L., Ferreira, M. F. P., Borges Ferraz Facury, A. G., de Toubes, K. M. P. S., & Borges, G. A. (2026). Effect of silane and temperature on the bond strength between glass ceramic and resin cement. Revista De Ensino, Pesquisa E Extensão Em Saúde, 1(1), 1–12. Recuperado a partir de https://revistas.uniube.br/index.php/epex/article/view/1919

Número

Vol. 1 Núm. 1 (2026): Publicação contínua

Sección

Artigos

Artículos similares

También puede Iniciar una búsqueda de similitud avanzada para este artículo.